| Designation | TMBH 5/230V TMBH 5/120V | |
| Application 1) | ||
| Bearing weight 2) | up to 5 kg (11 lb) | |
| Min. bearing bore diameter | 20 mm (0.8 in.) | |
| Max. bearing bore diameter | 100 mm (4 in.) | |
| Operating space heating clamp | 50 x 50 mm (2 x 2 in.) | |
| Max. bearing width | 50 mm (2 in.) | |
| Maximum Power | TMBH 5/230V: 350W TMBH 5/120V: 350W | |
| Voltage and frequency | TMBH 5/230V: 230 V ±10%, 50/60Hz TMBH 5/120V: 120 V ±10%, 50/60Hz | |
| Max. current consumption | TMBH 5/230V: 2A TMBH 5/120V: 4A | |
| Temperature Control | 40 to 200 °C (104 to 392 °F) | |
| Time Control | 5 seconds – 60 minutes | |
| Demagnetization | The heater does not magnetize | |
| Dimensions (l x w x h) | 275 x 180 x 270 mm (10.8 x 7.09 x 10.6 in.) | |
| Total Weight | 3 kg (6.6 lb) | |
| 1) SKF does not recommend heating bearings capped with seals or shields above 80 °C (175 °F). However, if higher temperatures are necessary, please contact SKF. The heater is designed for maintenance operations where some cooling in between jobs is allowed. | ||
| 2) Depending on the geometry of the bearing, maximum heating temperature. | ||
